- Faucets & Hardware
- Shower Seating
- Showers & Bases
- Grab Bars & Safety Items
- Everyday Essentials
- Commercial Items
Curved Piano Grab Bar by Seachrome | 30" | 'Wellness Series' w/Towel Bar | Satin Stainless | GW-3730
Order in left hand or Right hand Configuration
The Seachrome Wellness Series This elegant, softly curving fixture serves a dual function as a towel bar and supportive grab bar, with the extra durability of stainless steel. Your peace of mind, our beautifully crafted designs. Seachrome’s in-depth knowledge of manufacturing and craftsmanship assures that the Wellness Series meets the highest standards in its class. Comfort, safety and beauty combine in each of these bold, innovative designs. The Wellness Series integrates our decades of experience in providing stable and secure structural options in a bathroom environment – proven to create confidence, self-reliance and peace of mind for the elderly and physically impaired. Underlying the fluid lines and elegant simplicity is our commitment to functional support, durability and intelligent style – all in service to health and quality of life.
|WELLNESS SERIES STANDARD FINISH/COLOR OPTIONS|
Satin Stainless (Standard)
The Following are available at additional Cost -
Polished Stainless, Powder Coat (9 standard colors on #304 stainless steel: White, Biscuit, Almond, White Wrinkle, Almond Wrinkle, Satin Nickel, Bronze, Black, Polished Brass)
Click on Link for Available Colors- https://seachrome.com/file_downloads/grabbarcolorsandfinishes.png
Printable Specification Sheet Seachrome GW-3700 Series Grab Bar - Spec Sheet
|LOAD BEARING AND INSTALLATION|
When properly installed, all Seachrome 1½" clearance, wall-mounted, straight bars have been designed and manufactured to support loads exceeding the downward pull requirements for Federal specifications FHA, VA, HUD, hospital codes, and private construction. The actual "in use" load bearing capacity of any grab bar, however, will be limited by the strength of its mounting surface and installation hardware. Seachrome recommends that grab bars be installed using 2" minimum thickness "in wall" solid wood backing material with #10 x 2" stainless steel, phillips-head, sheet metal screws, or using a wall embedded, minimum 12 ga. (2.8mm) steel anchor plate with #10 x 24 stainless steel machine screws. When mounting on toilet partitions, Seachrome recommends the use of 3" (76mm) dia., 16 Ga. (1.6mm), stainless steel, "through wall" anchor disks. Please contact the factory for further mounting recommendations.
UNDER NO CIRCUMSTANCES SHOULD ANY GRAB BAR BE MOUNTED TO DRYWALL, SHEETROCK, PLASTER, FIBERGLASS, ACRYLIC OR OTHER SIMILAR "HOLLOW" WALL SURFACES WITHOUT APPROPRIATE WOOD OR STEEL BACKING MATERIAL.