- Faucets & Hardware
- Shower Seating
- Showers & Bases
- Grab Bars & Safety Items
- Everyday Essentials
- Commercial Items
Seachrome Wellness Series' Swing-Up Wall Mounted Grab Bar. GW-4130-QSS: 1-1/4" diameter x 18 gauge, .048. Mounting plate (10 gauge, .135) with swing-up bar and constant friction hinge (12 gauge, .135) . Standard Size: 30" x 9-1/2" with 11-1/2" mounting plate. The swing-up grab bar can be easily guided upwards to create space – with less than three pounds of pressure – and down again for secure support. The smart design ensures it will never move on its own weight. Used in a wide variety of applications for accessibility and support in restrooms and water closets, this safety grab bar enables the user to raise and lower themselves from a sitting position when it is in the down position. It also swings up for ease of entry. Fabricated in durable #304 stainless steel, it can support 250 lbs. when properly installed.
Your peace of mind, our beautifully crafted designs. Seachrome’s in-depth knowledge of manufacturing and craftsmanship assures that the Wellness Series meets the highest standards in its class. Comfort, safety and beauty combine in each of these bold, innovative designs. The Wellness Series integrates our decades of experience in providing stable and secure structural options in a bathroom environment – proven to create confidence, self-reliance and peace of mind for the elderly and physically impaired. Underlying the fluid lines and elegant simplicity is our commitment to functional support, durability and intelligent style – all in service to health and quality of life.
|WELLNESS SERIES STANDARD FINISH/COLOR OPTIONS|
Standard material / Color is Satin Stainless
The following Colors are available at additional cost -
Specification Sheet Seachrome GW-4100 Series Grab Bar - Spec Sheet
|LOAD BEARING AND INSTALLATION|
When properly installed, all Seachrome 1½" clearance, wall-mounted, straight bars have been designed and manufactured to support loads exceeding the downward pull requirements for Federal specifications FHA, VA, HUD, hospital codes, and private construction. The actual "in use" load bearing capacity of any grab bar, however, will be limited by the strength of its mounting surface and installation hardware. Seachrome recommends that grab bars be installed using 2" minimum thickness "in wall" solid wood backing material with #10 x 2" stainless steel, phillips-head, sheet metal screws, or using a wall embedded, minimum 12 ga. (2.8mm) steel anchor plate with #10 x 24 stainless steel machine screws. When mounting on toilet partitions, Seachrome recommends the use of 3" (76mm) dia., 16 Ga. (1.6mm), stainless steel, "through wall" anchor disks. Please contact the factory for further mounting recommendations.
UNDER NO CIRCUMSTANCES SHOULD ANY GRAB BAR BE MOUNTED TO DRYWALL, SHEETROCK, PLASTER, FIBERGLASS, ACRYLIC OR OTHER SIMILAR "HOLLOW" WALL SURFACES WITHOUT APPROPRIATE WOOD OR STEEL BACKING MATERIAL.
All Seachrome items are 'made to order'. Please allow 2-3 for Mfg time plus 3-4 days for ship time.
|All Seachrome items are 'Made to Order' and are not kept in stock. As such, 'Made to Order' items are not returnable and any orders placed for 'Made to Order items' MUST be cancelled within 24 hours of having placed the order to be eligible for a refund.|