•Floor to Ceiling Range: 93”-99”
•Pole Diameter: 1.5”
•Material: Alloy steel
•Finish: Anti-microbial white powder coat
•Weight Capacity: 300lbs
•Install Yourself
Quick Easy Secure Installation. Simply turn the screw at the bottom of the pole and the pole will expand between the floor and ceiling creating unparalleled sturdiness and reliability : Versatile. Need to remove or relocate the pole Not a problem Rubber pads on the floor and ceiling plates prevent marking even on stipple ceilings
Innovative SuperBar. A gentle lift unlocks the bar. Keep the bar up to move freely. Let the bar down to lock. Provides 8 locking positions around the SuperPole : Trusted Support. Push or pull on the bar to assist with sitting standing and moving. To help prevent a forward fall the bar will lock if released. Widely prescribed by therapists around the world
Reduce Caregiver Strain. Maximize the use of available strength while a caregiver supervises. Promotes safe and independent movement : Space Saver. Great for around the bath or toilet where limited space can make it difficult for a wheelchair walker or rollator
Weight Capacity 300lbs : Floor to Ceiling Range: Standard 8ft. Ceilings. 93-99"/236-251cm : Made In Canada
- Step 1
1. Attach the top plate to the pole assembly with supplied clevis pin. - Step 2
2. Place the base plate on the floor at the intended location. Insert the pole assembly into the base plate. - Step 3
3. Make pole vertically level and insert a screwdriver thru drive hole in the jackscrew. - Step 4
4. While holding pole, turn jackscrew (with screwdriver) clockwise until pole is tightened between floor and ceiling. - Step 5
5. Ensure ceiling plate spans one or two ceiling joists. - Step 6
6. Turn jam nut to lock the jackscrew. This prevents pole from loosening. - Step 7
7. Lower plastic sleeve to cover jackscrew.