Grab Bar by Seachrome | 24" x 1-1/4" | Stainless Steel | 'Coronado Platinum Series' | GSS-240-QP
THE BEAUTY OF ELEGANT DESIGN. THE STRENGTH OF AMERICAN CRAFTSMANSHIP.
Seachrome’s exceptional commitment to classic design and American-made quality carries throughout our beautiful and durable Coronado series. With the long-lasting strength of 100% stainless steel, this elegant line offers versatility, functionality and our special premium finishes to provide beautiful products that will withstand repetitive use — and meet the highest aesthetic standards for hotels, hospitals and other commercial projects. All Coronado accessories are WingIts compatible and are made almost wholly from recycled materials, 100% recyclable in finished form and ready for LEED compliance.
|CORONADO SERIES STANDARD FINISH/COLOR OPTIONS|
|FEATURES & SPECIFICATIONS
When properly installed, all Seachrome 1½" clearance, wall-mounted, straight bars have been designed and manufactured to support loads exceeding the downward pull requirements for Federal specifications FHA, VA, HUD, hospital codes, and private construction. The actual "in use" load bearing capacity of any grab bar, however, will be limited by the strength of its mounting surface and installation hardware. Seachrome recommends that grab bars be installed using 2" minimum thickness "in wall" solid wood backing material with #10 x 2" stainless steel, phillips-head, sheet metal screws, or using a wall embedded, minimum 12 ga. (2.8mm) steel anchor plate with #10 x 24 stainless steel machine screws. When mounting on toilet partitions, Seachrome recommends the use of 3" (76mm) dia., 16 Ga. (1.6mm), stainless steel, "through wall" anchor disks. Please contact the factory for further mounting recommendations.
UNDER NO CIRCUMSTANCES SHOULD ANY GRAB BAR BE MOUNTED TO DRYWALL, SHEETROCK, PLASTER, FIBERGLASS, ACRYLIC OR OTHER SIMILAR "HOLLOW" WALL SURFACES WITHOUT APPROPRIATE WOOD OR STEEL BACKING MATERIAL.
Printable Specification Sheet: https://seachrome.com/file_downloads/GSS-QP1.pdf
|Returns will be accepted only with written authorization. A 30% restocking charge shall be assessed on all returns. A Return Goods Authorization (RGA) number must accompany all returned goods. All returned goods are to be shipped to Seachrome prepaid.|