Seachrome Bench Style 22" x 15" Shower Seat w/ Swing Down Legs Naugahyde White (Shown Above) or Almond Cushion SSB2-220150 NW or NA
A convenient bench seat that provides secure support in the shower, and easily folds against the wall when not in use. It features swing-down legs that raise the seat to the 17-19" minimum height required to meet ADA regulations. Choose from a range of material and finish options.
STANDARD SEAT MATERIALS/COLORS |
Seat top material options: (Shown above) Naugahyde 1-1/2" cushion (offered in Almond or White) NA or NW Seat top design: 3" slats (phenolic material only) or one-piece solid with standard drain slots Phenolic material (offered in Almond, Teak or White) PA, PT or PW - Standard Style Optional Styles Below at additional costs- Please call for pricing One-piece solid HDPE (White) HW Phenolic One piece (9 standard Color options) PTS or PWS Swing-down legs: #304 stainless steel, 1" diameter x 18 gauge, .048, adjustable to 17-19" height Frame: constructed from #304 stainless steel, 1-1/4 square x 18 gauge, .048 with flanges (3" diameter x 10 gauge, .135), welded to tubing (1" diameter x 18 gauge, .048) Legs automatically lock in place when seat is raised up Available frame finishes: Satin Stainless, Polished Stainless, Powder Coat (9 standard colors: White, Biscuit, Almond, White Wrinkle, Almond Wrinkle, Satin Nickel, Bronze, Black, Polished Brass) Supports in excess of 900 lbs. when properly installed. |
SPECIFICATIONS |
Swing-down legs: #304 stainless steel, 1" diameter x 18 gauge, .048, adjustable to 17-19" height Frame: constructed from #304 stainless steel, 1-1/4 square x 18 gauge, .048 with flanges (3" diameter x 10 gauge, .135), welded to tubing (1" diameter x 18 gauge, .048) Load Bearing and Installation:When properly installed, all Seachrome shower seats have been designed and manufactured to support loads exceeding the downward pull requirements for Federal specifications FHA, VA, HUD, hospital codes, and private construction. The actual "in use" load bearing capacity of any shower seat, however, will be limited by the strength of its mounting surface and installation hardware. Seachrome recommends that shower seats be installed using 2" minimum thickness "in wall" solid wood backing material with #10 x 2" stainless steel, phillips-head, sheet metal screws, or using a wall embedded, minimum 12 ga. (2.8mm) steel anchor plate with #10 x 24 stainless steel machine screws. Please contact the factory for further mounting recommendations. Specifications: https://seachrome.com/file_downloads/SSB2-220150%E2%80%93HW.pdf |