- Faucets & Hardware
- Shower Seating, Code Compliant Seating
- Showers & Bases
- Grab Bars & Safety Items
- Everyday Essentials
- Commercial Items
The Contractor Advantage Series offers contractors the option to CHOOSE without compromise.
The Acrylic tubs in the Contractor Advantage (CA) Series are constructed of thermal formed cast acrylic that is long lasting, durable, non-porous and easy to clean.
All of the CA Series tub bottoms are reinforced for no-flex strength and all units are mounted on pre-leveled feet for easy, no-mudset installation. An acrylic tile flange is available on select CA units to aid in alcove installations.
All CA units feature Grip Sure? textured bottoms. Whirlpool models feature our exclusive safety suction return fitting. Each unit is factory pre-tested and certified.
HIGH PERFORMANCE PUMP
CA whirlpool units are standard with a high performance / high output 1.25 HP pump with run dry feature; requires a 120V, 15amp GFCI protected dedicated circuit. The CA pump is energy efficient, anti-corrosive, self draining, and is double insulated - thus allowing for safe and quiet operation. The run dry feature prevents pump damage if activated without sufficient water.
CA whirlpool and air jet units are fitted with Premium Power-Flow and Ease-Flow Adjustable jets. The Premium Power-Flow Adjustable Jet is a fully adjustable flow rate and directional jet that gives users the opportunity to make each bathing experience truly their own. Our Ease-Flow Adjustable Jet features a reduced flow-rate that delivers pinpointed directional flow to lumbar and lower extremity zones.
The CA in-line heater has been specifically designed to enhance the enjoyment of your whirlpool bath. The in-line heater constantly maintains the warm relaxing temperature of the whirlpool bath for as long as you desire.
All acrylic Contractor Advantage tubs are available as soaker tubs, whirlpools or air tubs.
Dimensions: 60” x 42” x 18.25” (Due to the nature of the materials, dimensions may vary +/- 1/2”)
Cut Out: 58" x 40"
Weight: 194 lbs
Capacity: 49 gallons
Hydro-Massage System: 4 Premium Power-Flow Adjustable Jets & 1 Lumbar Ease-Flow Adjustable Jets
Surface: High gloss premium cast acrylic
Special Notes: This unit complies with ANSI 124.1 and shall meet the requirements for Uniform Plumbing Code administered by NAHB and CSA.
Installation Sheet http://aquariusproducts.com/PDF/InstallSheets/12.pdf
Deco Skirt Installation http://aquariusproducts.com/PDF/InstallSheets/13.pdf
Care and Cleaning of Premium Acrylic Units
Premium Acrylic product is manufactured with a premium thermoformed surface that is far thicker than other product surfaces. The Premium Acrylic surface is virtually non-porous which ensures luster retention for decades. The surface of the unit is made of extremely durable and glossy Premium Acrylic; however the surface is vulnerable to the harsh conditions of a construction site. Please use caution with tools, boots and handling of the unit. It is recommended to save the cardboard from the packaging and place it on the floor to stand on while working and installing the unit.
Cleaning either daily or weekly:
Warm soapy water; Liquid dishwashing cleaners are the safest to use
A vinegar and water solution
Non-Abrasive cleaners may be used if diluted (Do not use Soft Scrub; it contains a mild abrasive that could harm the finish).
For areas that require a stronger solution, Mineral Spirits may be applied but required to follow immediately with warm soapy water and rinse. Mineral Spirits are not allowed to stay on the product for a period of time to exceed 2 minutes. (Remember, warm soapy water must be used immediately afterwards).
For inquiries please contact Praxis Companies at 800-443-7269.
Please follow all cleaning recommendations to insure a lasting glossy finish for Premium Acrylic products.
The products manufactured and sold by Aquarius are under warranty for Life on AcrylXâ„¢ Applied Acrylic and CenturyStoneâ„¢ Solid surface models for Residential use and Thirty (30) Years for Commercial use, five (5) years on Premium Cast Acrylic products. This warranty applies to the materials and the workmanship of the product.
The liability will not exceed the selling price of the product.
If the product shall prove to have material defects, manufacturing defects or other labor defects, during the warranty period, it shall be repaired or replaced at the discretion of the warranty department of Aquarius Bathware.
This warranty shall not apply to incorrect operating procedures, breakage or damage caused by neglect, improper maintenance, storage, abuse, misuse, alterations or modification to the unit by the buyer or anyone representing the buyer. It will not cover weather damage, chemical corrosion, natural corrosion, fire or any other act by the force of nature. The product is not recommended for outside storage due to wood reinforcement being susceptible to the elements.
The buyer of this product is fully responsible for the proper installation of this unit. Aquarius will not be held responsible for any damages resulting from improper installation.
This warranty does not apply to any equipment or accessories not installed by Aquarius and Aquarius will not be held liable for any results of such acts.
Aquarius is not responsible for any consequential or incidental mishaps, inconvenience, time loss, incidental expense, materials or labor related to the installation of hardware or the actual tub.
COMMERCIAL PRODUCT, SPECIAL ORDER AND NON-STANDARD COLOR PRODUCTS CANNOT BE RETURNED FOR ANY REASON. Standard stock items may be returned with prior approval and are subject to a 50% restocking fee plus cost of return freight. No product can be returned after eight weeks from ship date. Goods for return authorized in advance by The Praxis Companies, LLC must be returned within (30) days of authorization, shipping freight prepaid. The Praxis Companies, LLC will assign an RGA number to the unit which must be placed on the outside of the carton to be returned. NO RETURNS WILL BE ACCEPTED WITHOUT THIS NUMBER. Credit for goods returned under an RGA will be issued after all units are inspected at the factory and deemed to be in sellable condition. No credit will be issued on units deemed un-sellable.
FULL FREIGHT ALLOWED ON ALL 1/2 TRUCK LOADS (18 LOAD POINTS) AND FULL TRUCK LOADS. LESS THAN 1/2 TRUCK LOADS (17 TO 12 POINTS) WILL BE CHARGED A DROP FEE OF $75 (6 POINTS OR LESS IS LTL ONLY).
Order Cancellation or Change:
You may cancel or change an order for standard models if the request is received within twenty-four (24) hours of the original order entry date. Written confirmation of the cancellation or change must be given. No cancellations or changes may be made after twenty-four (24) hours. We cannot be responsible for errors made as a result of verbal communications not followed by written confirmation. An order for nonstandard colors or modified units requiring special accessories or equipment cannot be cancelled.
For any questions or requests contact our warranty department at:
or by writing to:
Aquarius Warranty Department
435 Industrial Road
Savannah, TN 38372