L-Shaped Left Hand Shower Transfer Seat by Seachrome | 32" x 22.5" | Naugahyde | SSL-320225 NW

$430.45
$348.00
(You save $82.45 )
(No reviews yet) Write a Review
SKU:
SSL-320225
L-Shaped Left Hand Shower Transfer Seat by Seachrome | 32" x 22.5" | Naugahyde | SSL-320225 NW

L-Shaped Left Hand Shower Transfer Seat by Seachrome | 32" x 22.5" | Naugahyde White| SSL-320225 NW .

A transfer seat that offers enhanced security while bathing. It is available in Left or Right-Hand configurations.  Choose from a range of standard sizes and materials.

STANDARD SEAT MATERIALS/COLORS
  • Seat top material options:Seat top design:  3" slats (phenolic material only) or one-piece solid with standard drain slots
    • Phenolic material, offered in Almond, Teak or White
    • 1-1/2" cushion, offered in Almond or White
    • One-piece solid HDPE (White)
    • Solid Surface material (9 standard options)
  • Frame:  constructed from #304 stainless steel
  • Yoke:  #304 stainless steel (1" diameter x 18 gauge, .048) with flanges (3" diameter x 10 gauge, .135), welded to tubing (1" round x 18 gauge, .048)
  • Available frame finishes:  Satin Stainless, Polished Stainless, Powder Coat (9 standard colors: White, Biscuit, Almond, White Wrinkle, Almond Wrinkle, Satin Nickel, Bronze, Black, Polished Brass)
  • Available sizes:Meets and exceeds the minimum 250 lb. load requirement when properly installed.
    • 26"W x 22-1/2"D
    • 28"W x 22-1/2"D
    • 32"W x 22-1/2"D
SPECIFICATIONS

Load Bearing and Installation:

When properly installed, all Seachrome shower seats have been designed and manufactured to support loads exceeding the downward pull requirements for Federal specifications FHA, VA, HUD, hospital codes, and private construction. The actual "in use" load bearing capacity of any shower seat, however, will be limited by the strength of its mounting surface and installation hardware. Seachrome recommends that shower seats be installed using 2" minimum thickness "in wall" solid wood backing material with #10 x 2" stainless steel, phillips-head, sheet metal screws, or using a wall embedded, minimum 12 ga. (2.8mm) steel anchor plate with #10 x 24 stainless steel machine screws. Please contact the factory for further mounting recommendations. Seachrome seats meet Federal Spec. WW-P-541/8B and ANSI 117.1. When properly installed, all seats exceed applicable federal load specifications. These models have been independently tested to withstand 1,000 lbs in a 30-minute static load test.

 

Under no circumstances should any shower seat be mounted to drywall, sheetrock, plaster, fiberglass, acrylic or other similar "hollow" wall surfaces without appropriate wood or steel backing material.

Printable Specification Sheet https://seachrome.com/file_downloads/SSR-320225-HW.pdf

Brochure https://seachrome.com/signature/bath-and-shower-seats/#
Product has no reviews please write a review Write a Review

Related Products